Your cart is empty
Acebmx.com BMX Parts

Phil Wood Spoke Cutting and Threading Machine

  • Model: SCTM04
  • Shipping Weight: 25lbs
  • Manufactured by: Phil Wood

$4,900.00  $4,500.00
Save: 8% off

4500 reward points

Order Phil Wood Spoke threading and cutting Machine SCTM04
If you want more than one Option we will bill you. Type the options you want in order comments

Shipping/Item Insurance is included

Phil Wood Spoke Cutting and Threading Machine

The Phil Wood Spoke Cutting and Threading Machine is designed and manufactured to provide an invaluable tool to manually size, cut, and place a factory-quality thread on a spoke within a few seconds. The thread is rolled/cold forged onto the spoke, which does not remove material as would occur if the thread were cut into the spoke.

The machine performs through the operation of a manual crank. One revolution of the machine handle both cuts and threads the spoke. It is designed to cut and thread 1.8 mm (15 ga.), 2.0 mm (14 ga.), 2.3 mm (13 ga.) and 2.6 mm (12 ga.) spokes and place 10 mm of 56 tpi thread on the end of each spoke. Please note: Spacers to set the machine to cut 2.3mm (13 ga) and 2.6mm (12 ga) are available, but are not offered as a standard accessory included with the machine.

Our machine is capable of cutting carbon steel, stainless steel, titanium, anodized, and powder coated spokes. Butted and aero spokes can be cut and threaded on the full diameter portion of the spoke. Please be sure to thoroughly clean your machine and dies after cutting and threading powder coated spokes.

The spoke machine die set has two surfaces for cold forging rolled threads onto a spoke. If properly maintained, each surface can roll 60,000 spokes, for a total of 120,000 spokes on a single die set. When cutting and threading standard spokes, some die sets have reached upwards of 160,000 spokes. Lubrication with Phil Tenacious Oil is recommended during the cutting and threading process, applied to the dies every 20 - 30 operations.

 

  • Accessories Included with the purchase of a New Spoke Machine:
  • Spoke Holder - Long
  • 1.8mm Setup Spacer
  • 2.0mm Setup Spacer
  • Spoke Gage & Length Measure Scale
  • 6” California Bicycle Products Group Scale
  • Spoke Cutting & threading Machine Manual
  • Hex Wrench Set: 1/4, 5/32, 3/16 and 5/16
  • Eye Goggles
  • 4oz Bottle of Phil Tenacious Oil
  • 16oz Tub of Phil Hand Cleaner

 

  • Additional Accessories that can be purchased for your Spoke Machine:
  • Spoke Machine Vice Mount Assembly
  • Spoke Cutting & Threading Tray
  • Straight Pull Spoke Holder
  • Spoke Machine Dust and Dirt Cover
  • Spoke Cut Off Guard
  • Short Spoke Holder
  • 2.3mm Setup Spacer
  • 2.6mm Setup Spacer

 

  • A list of a few of our larger corporate users of the Phil Wood Spoke Cutting and Threading Machine:
  • Campagnolo
  • Cane Creek
  • Chris King
  • DT Swiss
  • Easton
  • Euro-Asia Imports
  • Facebook
  • Hayes Bicycle Group
  • HED Cycling
  • J & B Importers
  • Paceline
  • Quality Bicycle Products
  • Raleigh America
  • Sapim
  • Specialized
  • Spinergy
  • Shimano
  • Velocity
  • Note: If you are is going to cut shorter spokes than 154mm then maybe add the
    short spoke holder to your order comments, the standard one that comes on the machine goes from
    54mm to 310mm. The short spoke holder cuts from 74mm to 154mm.


Add to Cart:



This product was added to our catalog or last edited on Wednesday 14 March, 2018. If this item was added years ago, please email or call to verify stock.

ACEBMX.com is focused on BMX and BMX type riding. Shop Americancycle.com for Mountain Bikes,
Road Bikes, Fixed Gear and BMX. The BMX Parts are the same, but Americancycle.com will have
more NON-BMX Parts, Bikes, Frames, Tools and accessories.

Secure Site